ASTMDocument Title
A90Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A309Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
A428Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
B117Standard Practice for Operating Salt Spray (Fog) Apparatus
D1654Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
D1735Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
D2247Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
D3418Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning
Calorimetry
D4541Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
E96Standard Test Methods for Water Vapor Transmission of Materials
E322Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry
E350Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
E351Standard Test Methods for Chemical Analysis of Cast Iron—All Types
E352Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Mediumand High-Alloy Steels
E353Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
E415Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
E572Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
E1019Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques
E1086Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
E1251Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
E1252Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
E1508Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
E1613Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace
Atomic Absorption Spectrometry (GFAAS) Techniques
E1999Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
E2594Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)
F963Standard Consumer Safety Specification for Toy Safety
F2075Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
F2853Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple
Monochromatic Excitation Beams
G95Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
G154Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory for tests on the following products and materials: steel, stainless steel, aluminum and alloys, brass and bronze, copper and alloys, titanium, zinc coating, nickel and cobalt alloys, polymers, paint, metallic coatings, polymer coatings, glass and ceramic materials1.

Test Technologies          Test Method(s)  
ICP-AES (Alloys and Lead) ASTM F963 (Section 4.3.5.1(2)), ASTM E1613, ASTM E2594; ICP-SLTL-002 (Rev. 1)2; 16 CFR Part 1303; CPSC-CH-E1001-08.1; CPSC-CH-E1002-08.1; CPSC-CH-E1003-09.1  
Gas Chromatography Mass Spectrometry CPSC-CH-C1001-09.3  
X-ray Fluorescence Spectroscopy (XRF, PMI) ASTM E2119 (Withdrawn 2009)3, ASTM E572;  16 CFR Part 1303
  1. The Consumer Product Safety Improvement Act (CPSIA) requires that every children’s product subject to a federal consumer product safety requirement be tested by a Consumer Product Safety Commission (CPSC) accepted laboratory for compliance with the applicable federal children’s product safety requirements.  Accreditation by A2LA does not infer acceptance by the CPSC.  Please verify this organization’s acceptance status by using the CPSC’s searchable database, located at http://www.cpsc.gov/cgi-bin/labsearch/.
  • In-house method using modified ASTM E2594.
  • This laboratory’s scope contains withdrawn or superseded methods.  As a clarifier, this indicates that the applicable method itself has been withdrawn or is now considered “historical” and not that the laboratory’s accreditation for the method has been withdrawn.
  Test Technologies     Test Method(s)
Optical Emission Spectroscopy of Steel Alloys, Stainless Steels, Cast Iron, Aluminum Alloys (Al, Ar, B, Be, Bi, Bo, C, Ca, Co, Cr, Cu, Fe, Ga, Li, Mg, Mn, Mo, N, Na, Nb, Ni, P, Pb, S, Sb, Si, Sn, Sr, Ti, V, Zn, Zr)   ASTM E415, ASTM E1086, ASTM E1999, ASTM E1251
Combustion Analysis (C and S)  ASTM E1019  
SEM/EDS ASTM E1508  
Fourier Transform Infrared Spectroscopy ASTM E1252  
Thermographic Analysis ASTM E1131, ASTM D6370  
Differential Scanning Calorimetry ASTM D3418  
Cathodic Disbondment ASTM G95  
Coating Permeability ASTM E96/E96M  
Coating Adhesion ASTM D4541  
Soluable Migrated Elements   ASTM F2075 (Sections 4.5.2 and 8)
Soluble Element Test    ASTM F963 (Sections 4.3.5.1 (2) and 4.3.5.2)