ASTM A36Standard Specification for Carbon Structural Steel
ASTM A47Standard Specification for Ferritic Malleable Iron Castings
ASTM A48Standard Specification for Gray Iron Castings
ASTM A220Standard Specification for Pearlitic Malleable Iron
ASTM A255Standard Test Methods for Determining Hardenability of Steel
ASTM A327Standard Test Methods for Impact Testing of Cast Irons
ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A615Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
ASTM A673Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
ASTM A833Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A956Standard Test Method for Leeb Hardness Testing of Steel Products
ASTM A1011Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM B557Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
ASTM B565Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
ASTM B769Standard Test Method for Shear Testing of Aluminum Alloys
ASTM C273Standard Test Method for Shear Properties of Sandwich Core Materials
ASTM C297Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
ASTM C364Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
ASTM D412Standard Test Methods forVulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D624Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D638Standard Test Method for Tensile Properties of Plastics
ASTM D695Standard Test Method for Compressive Properties of Rigid Plastics
ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D1002Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D2240Standard Test Method for Rubber Property—Durometer Hardness
ASTM D2794Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D3363Standard Test Method for Film Hardness by Pencil Test
ASTM D4060Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D7250Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness
ASTM E8Standard Test Methods for Tension Testing of Metallic Materials
ASTM E9Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM E10Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E18Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E21Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E23Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E77Standard Test Method for Inspection and Verification of Thermometers
ASTM E110Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
ASTM E340Standard Practice for Macroetching Metals and Alloys
ASTM E643Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
ASTM F606Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM F3125Standard Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile Strength, Inch and Metric Dimensions
AWS D1.1Structural Welding Code – Steel
AWS D1.2Structural Welding Code – Aluminum
AWS D1.5Bridge Welding Code
AWS B2.2Standard for Brazing Procedure and Performance Qualification
API 5LLine Pipe
API 1104Welding of Pipelines and Related Facilities
ASME Sec IXBoil & Pressure Vessel Code

In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on metallic and non-metallic materials:

Test Technologies

Tension

(Elevated Temperature to 1000 C) 

(Up to 120,000 lbs) 

Impact

Charpy

Gardner Izod

Tear Strength


Flexural Properties

Metallographic Evaluation Inclusion Content

Graphite in Cast Iron

Decarburization

Grain Size

Case Depth

Plating Thickness

Test Method(s)

ASTM A370, ASTM B557, ASTM D412,

ASTM D638, ASTM E8/E8M, ASTM E21,

ASTM F606/F606M; ASME SA370

ASTM E23, ASTM A370; API 5L 1104;

ASME (Section IX QW-140);

AWS B2.1/B2.1M (Section 4.7.7),

AWS D1.1/D1.1M (Section 4.27),

AWS D1.5/D1.5M (Section 5.16.4);

EN 10045-1

ASTM D2794

ASTM D256

ASTM D624 (Sections 4.2.2, 4.2.3 and 4.2.4)

ASTM D790

ASTM E45 (Method A)

ASTM A247

ASTM E1077 (Sections 7.2, 7.3 and 7.4);

SAE J419 (Sections 4.1 and 4.2)

ASTM E112 (Section 10)

SAE J423 (Sections 5.2 and 6.3)

ASTM B487

Test Technologies

Corrosion Testing            

Coating Weight 

Salt Water Spray

Humidity Testing

Exposure of Nonmetallic Materials (QUV)

Coefficient of Friction

Compression Testing

Shear Testing

Hardenability

Macroetch

Hardness

Brinell (500-3000) kg

Rockwell (A, B, C, 15N, 30N, 45N, 15T, 30T,

45T)

Durometer (Shore A and D)

Pencil

Microhardness

Knoop (100, 500g)

Vickers (100, 500g)

Macrohardness

Vickers (10kgf)

Leeb Rebound Method

Bend

Test Method(s)

ASTM A262 (Practices A and E), ASTM G28,

ASTM G31, ASTM G34, ASTM G36,

ASTM G48 (Method A)

ASTM A90/A90M, ASTM A309,

ASTM A428/A428M

ASTM B117, ASTM D1654

ASTM D2247

ASTM G154, ASTM G151

ASTM C1028-07e11 (withdrawn 2014),

ASTM D1894

ASTM E9, ASTM D695

ASTM D1002

ASTM A255

ASTM E340; API 5L 1104;

ASME (Section IX QW-140); AWS B2.1/B2.1M

(Annex G), AWS D1.1/D1.1M (Sections 4.9.4 &

4.22.2), AWS D1.2 (Annex H), AWS D1.5/D1.5M

(Section 5.18.2)

ASTM A833, ASTM E10

ASTM E18

ASTM D2240

ASTM D3363

ASTM E384

ASTM E92

ASTM A956

API 5L (Section 10.2.4), API 5L 1104 (Sections 5

& 6); ASME (Section IX QW-140);

AWS B2.1/2.1M (Annex A), AWS D1.1/D1.1M

(Section 4.9.3.1), AWS D1.2/D1.2M (Section 3.8),

AWS D1.5/D1.5M (Section 5.18.3)

  Test Technologies   Test Method(s)  
Taber Abrasion ASTM D4060  
Olsen Cup ASTM E643  
Weld Operator & Procedure Qualification API 5L 1104 (Sections 5 & 6); ASME (Section IX Articles II & III); AWS B2.1/2.1M, AWS D1.1/1.1M (Section 4 Parts B & C), AWS D1.2/D1.2M (Section 2 Parts C&D), AWS D1.3/D1.3M (Section 4 Parts B & C), AWS D1.5/D1.5M (Section 5 Parts A & B), AWS D1.6/D1.6M (Section 4 Parts A & B), AWS D1.8/D1.8M, D17.1/D17.1M (Section 5)  
Failure Analysis     Using the methods listed above (and on Scope of Accreditation 0397.01) in accordance with the ASM Handbook Volume 11